Black Silicon Carbide

Black Silicon Carbide /Black Carborundum is brittle and sharp.It is produced at high temperature in electric resistance type furnace with quarts sand and petroleum coke as its main raw materials. Its hardness is between Aluminum Oxide and Synthetic Diamond. Mechanical intensity of it is higher than Aluminum Oxide. It is brittle and sharp and has electrical and heat conductivity in some degree.

Usage:

It is suitable for make grinding wheels, cutting wheels, mounted wheels, oil stone, abrasive media, and also suitable for surface grinding, lapping or polishing. The abrasive products made of it are suitable for working on Cast Iron, Non-ferrous Metal, Rock, Leather, Rubber, Wood, ceramic, etc. It is also broadly used as high-grade refractory material and metallurgical additive.

We can supply quality Black Silicon Carbide grains and micro powder based on ISO standard, FEPA standard, P standard for coated abrasives & JIS standard.

Specification:

Grit	SiC	F.C.	Fe2O3
F12-F90	98.50%min	0.20%max	0.60%max
F100-F150	98.00%min	0.30%max	0.80%max
F180-F220	97.00%min	0.30%max	1.20%max
F230-F400	96.00%min	0.40%max	1.20%max
F500-F800	95.00%min	0.40%max	1.20%max
F1000-F1200	93.00%min	0.50%max	1.20%max
P12-P90	98.50%min	0.20%max	0.60%max
P100-P150	98.00%min	0.30%max	0.80%max
P180-P220	97.00%min	0.30%max	1.20%max
P230-P500	96.00%min	0.40%max	1.20%max
P600-P15000	95.00%min	0.30%max	1.20%max
P2000-P2500	93.00%min	0.50%max	1.20%max

Melting point	2600 °C
Hardness	9.5
Bulk density	1.38g/cm3
True density	3.20-3.25g/cm3

Applications:

1.Grinding non-ferrous materials, rock, stone, leather, rubber, finishing tough and hard materials
2.Bonded abrasive tools, lapping and polishing
3.Widely used as a metallurgical additive and refractory material.

Packaging Detail

25kg/plastic bag, 1mt/jumbo bag or as you require.